This commit is contained in:
Mans Ziesel 2023-09-07 19:20:39 +02:00
parent 8a97676098
commit f1c88e8890
25 changed files with 2281 additions and 0 deletions

590
.config/i3/config Normal file
View File

@ -0,0 +1,590 @@
# This file is a modified version based on default i3-config-wizard config
# source is available here:
# https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/master/.config/i3/config
# Maintainer: joekamprad [joekamprad //a_t// endeavouros.com]
# https://endeavouros.com
#
# iconic font icon search: https://fontawesome.com/v4.7/cheatsheet/
#
# --> to update this run the following command (will backup existing setup file)
# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/config -P ~/.config/i3/
#
# Endeavouros-i3 config file
# Source for complete framework of our i3 config and theming here: https://github.com/endeavouros-team/endeavouros-i3wm-setup
# EndeavourOS wiki holds some Information also: https://discovery.endeavouros.com/window-tiling-managers/i3-wm/
# Please see http://i3wm.org/docs/userguide.html for the official i3 reference!
#######################
# config starts here: #
#######################
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
font pango: Noto Sans Regular 10
# set the mod key to the winkey:
set $mod Mod1
#####################
# workspace layout: #
#####################
# default i3 tiling mode:
workspace_layout default
# i3 stacking layout:
# Each window will be fullscreen and tabbed top to bottom.
#workspace_layout stacking
# i3 tabbed layout:
# Each new window will open fullscreen as a tab (left to right)
#workspace_layout tabbed
##############################
# extra options for windows: #
##############################
#border indicator on windows:
new_window pixel 1
# thin borders
# hide_edge_borders both
# Set inner/outer gaps
gaps inner 4
gaps outer 2
# show window title bars (not officially supported with i3gaps)
#default_border normal
# window title alignment
#title_align center
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# switch/iterate between workspaces
bindsym $mod+Tab workspace next
bindsym $mod+Shift+Tab workspace prev
# switch to workspace
bindsym $mod+1 workspace $ws1
bindsym $mod+2 workspace $ws2
bindsym $mod+3 workspace $ws3
bindsym $mod+4 workspace $ws4
bindsym $mod+5 workspace $ws5
bindsym $mod+6 workspace $ws6
bindsym $mod+7 workspace $ws7
bindsym $mod+8 workspace $ws8
bindsym $mod+9 workspace $ws9
bindsym $mod+0 workspace $ws10
# switch to workspace with numpad keys
bindcode $mod+87 workspace 1
bindcode $mod+88 workspace 2
bindcode $mod+89 workspace 3
bindcode $mod+83 workspace 4
bindcode $mod+84 workspace 5
bindcode $mod+85 workspace 6
bindcode $mod+79 workspace 7
bindcode $mod+80 workspace 8
bindcode $mod+81 workspace 9
bindcode $mod+90 workspace 10
# switch to workspace with numlock numpad keys
bindcode $mod+Mod2+87 workspace $ws1
bindcode $mod+Mod2+88 workspace $ws2
bindcode $mod+Mod2+89 workspace $ws3
bindcode $mod+Mod2+83 workspace $ws4
bindcode $mod+Mod2+84 workspace $ws5
bindcode $mod+Mod2+85 workspace $ws6
bindcode $mod+Mod2+79 workspace $ws7
bindcode $mod+Mod2+80 workspace $ws8
bindcode $mod+Mod2+81 workspace $ws9
bindcode $mod+Mod2+90 workspace $ws10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace $ws1
bindsym $mod+Shift+2 move container to workspace $ws2
bindsym $mod+Shift+3 move container to workspace $ws3
bindsym $mod+Shift+4 move container to workspace $ws4
bindsym $mod+Shift+5 move container to workspace $ws5
bindsym $mod+Shift+6 move container to workspace $ws6
bindsym $mod+Shift+7 move container to workspace $ws7
bindsym $mod+Shift+8 move container to workspace $ws8
bindsym $mod+Shift+9 move container to workspace $ws9
bindsym $mod+Shift+0 move container to workspace $ws10
# move focused container to workspace with numpad keys
bindcode $mod+Shift+Mod2+87 move container to workspace $ws1
bindcode $mod+Shift+Mod2+88 move container to workspace $ws2
bindcode $mod+Shift+Mod2+89 move container to workspace $ws3
bindcode $mod+Shift+Mod2+83 move container to workspace $ws4
bindcode $mod+Shift+Mod2+84 move container to workspace $ws5
bindcode $mod+Shift+Mod2+85 move container to workspace $ws6
bindcode $mod+Shift+Mod2+79 move container to workspace $ws7
bindcode $mod+Shift+Mod2+80 move container to workspace $ws8
bindcode $mod+Shift+Mod2+81 move container to workspace $ws9
bindcode $mod+Shift+Mod2+90 move container to workspace $ws10
# move focused container to workspace with numpad keys
bindcode $mod+Shift+87 move container to workspace $ws1
bindcode $mod+Shift+88 move container to workspace $ws2
bindcode $mod+Shift+89 move container to workspace $ws3
bindcode $mod+Shift+83 move container to workspace $ws4
bindcode $mod+Shift+84 move container to workspace $ws5
bindcode $mod+Shift+85 move container to workspace $ws6
bindcode $mod+Shift+79 move container to workspace $ws7
bindcode $mod+Shift+80 move container to workspace $ws8
bindcode $mod+Shift+81 move container to workspace $ws9
bindcode $mod+Shift+90 move container to workspace $ws10
# resize window (you can also use the mouse for that):
#mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window's width.
# Pressing right will grow the window's width.
# Pressing up will shrink the window's height.
# Pressing down will grow the window's height.
# bindsym j resize shrink width 10 px or 10 ppt
# bindsym k resize grow height 10 px or 10 ppt
# bindsym l resize shrink height 10 px or 10 ppt
# bindsym ntilde resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
# bindsym Left resize shrink width 10 px or 10 ppt
# bindsym Down resize grow height 10 px or 10 ppt
# bindsym Up resize shrink height 10 px or 10 ppt
# bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape
# bindsym Return mode "default"
# bindsym Escape mode "default"
#}
#bindsym $mod+r mode "resize"
######################################
# keybindings for different actions: #
######################################
# start a terminal
bindsym $mod+Return exec kitty
# kill focused window
bindsym $mod+q kill
# exit-menu
bindsym $mod+Shift+e exec ~/.config/i3/scripts/powermenu
# Lock the system
# lock with a picture:
bindsym $mod+x exec i3lock -i ~/.config/i3/i3-lock-screen.png -p default|win -t
# lock by blurring the screen:
# bindsym $mod+l exec ~/.config/i3/scripts/blur-lock
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to update i3)
bindsym $mod+Shift+r restart
# keybinding in fancy rofi (automated):
bindsym F1 exec ~/.config/i3/scripts/keyhint-2
# alternative
# keybinding list in editor:
# bindsym $mod+F1 exec xed ~/.config/i3/keybindings
# Backlight control
#bindsym XF86MonBrightnessUp exec xbacklight +10 && notify-send "Brightness - $(xbacklight -get | cut -d '.' -f 1)%"
#bindsym XF86MonBrightnessDown exec xbacklight -10 && notify-send "Brightness - $(xbacklight -get | cut -d '.' -f 1)%"
# Backlight setting using dunst osc
bindsym XF86MonBrightnessUp exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh brightness_up
bindsym XF86MonBrightnessDown exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh brightness_down
# change focus
bindsym $mod+h focus left
bindsym $mod+j focus down
bindsym $mod+k focus up
bindsym $mod+l focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+h move left
bindsym $mod+Shift+j move down
bindsym $mod+Shift+k move up
bindsym $mod+Shift+l move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+z split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+g layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# open new empty workspace
bindsym $mod+Shift+n exec ~/.config/i3/scripts/empty_workspace
# Multimedia Keys
# volume
# use meta keys without showing osc
#bindsym XF86AudioRaiseVolume exec amixer -D pulse sset Master 5%+ && pkill -RTMIN+1 i3blocks
#bindsym XF86AudioLowerVolume exec amixer -D pulse sset Master 5%- && pkill -RTMIN+1 i3blocks
# use meta keys showing osc using dunst
bindsym XF86AudioRaiseVolume exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh volume_up
bindsym XF86AudioLowerVolume exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh volume_down
# gradular volume control
bindsym $mod+XF86AudioRaiseVolume exec amixer -D pulse sset Master 1%+ && pkill -RTMIN+1 i3blocks
bindsym $mod+XF86AudioLowerVolume exec amixer -D pulse sset Master 1%- && pkill -RTMIN+1 i3blocks
# mute
#bindsym XF86AudioMute exec amixer sset Master toggle && killall -USR1 i3blocks
# use meta keys showing osc using dunst
bindsym XF86AudioMute exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh volume_mute
# mic mute toggle
bindsym XF86AudioMicMute exec amixer sset Capture toggle
# audio control
bindsym XF86AudioPlay exec playerctl play-pause
bindsym XF86AudioPause exec playerctl play-pause
bindsym XF86AudioNext exec playerctl next
bindsym XF86AudioPrev exec playerctl previous
# Redirect sound to headphones
bindsym $mod+p exec /usr/local/bin/switch-audio-port
## App shortcuts
bindsym $mod+w exec /usr/bin/firefox
bindsym $mod+n exec /usr/bin/thunar
bindsym Print exec scrot ~/%Y-%m-%d-%T-screenshot.png && notify-send "Screenshot saved to ~/$(date +"%Y-%m-%d-%T")-screenshot.png"
# Power Profiles menu switcher (rofi)
bindsym $mod+Shift+p exec ~/.config/i3/scripts/power-profiles
##########################################
# configuration for workspace behaviour: #
##########################################
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1:"
set $ws2 "2:"
set $ws3 "3:"
set $ws4 "4:"
set $ws5 "5:"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
# use workspaces on different displays:
# where you have to replace VGA-0/HDMI-0 with the names for your displays
# you can get from xrandr command
#workspace $ws1 output VGA-0
#workspace $ws2 output VGA-0
#workspace $ws3 output HDMI-0
#workspace $ws4 output HDMI-0
#workspace $ws5 output HDMI-0
# bind program to workspace and focus to them on startup:
assign [class="Xfce4-terminal"] $ws1
assign [class="(?i)firefox"] $ws2
assign [class="Thunar"] $ws3
assign [class="thunderbird"] $ws4
assign [class="TelegramDesktop"] $ws5
# automatic set focus new window if it opens on another workspace than the current:
for_window [class=Xfce4-terminal] focus
for_window [class=(?i)firefox] focus
for_window [class=Thunar] focus
for_window [class=Thunderbird] focus
for_window [class=TelegramDesktop] focus
##############
# compositor #
##############
# transparency
# uncomment one of them to be used
# options could need changes, related to used GPU and drivers.
# to find the right setting consult the archwiki or ask at the forum.
#
# xcompmgr: https://wiki.archlinux.org/title/Xcompmgr
# manpage: https://man.archlinux.org/man/xcompmgr.1.en
# install xcompmgr package to use it (yay -S xcompmgr)
#exec --no-startup-id xcompmgr -C -n &
# or an more specialized config like this:
#exec --no-startup-id xcompmgr -c -C -t-5 -l-5 -r4.2 -o.55 &
#
# or:
#
# picom: https://wiki.archlinux.org/title/Picom
# manpage: https://man.archlinux.org/man/picom.1.en
# The default configuration is available in /etc/xdg/picom.conf
# For modifications, it can be copied to ~/.config/picom/picom.conf or ~/.config/picom.conf
# install picom package (yay -S picom)
# start using default config
#exec_always --no-startup-id picom -b
#
# for custom config:
#exec_always --no-startup-id picom --config ~/.config/picom.conf
#############################################
# autostart applications/services on login: #
#############################################
#get auth work with polkit-gnome
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
# dex execute .desktop files + apps using /etc/xdg/autostart.
# when second to i3 a DE is installed or mixed usage of i3 + xfce4 or GNOME
# in this cases better disable dex and use manual starting apps using xdg/autostart
# if enabled you should comment welcome app.
# https://github.com/jceb/dex
#exec --no-startup-id dex -a -s /etc/xdg/autostart/:~/.config/autostart/
exec --no-startup-id dex --autostart --environment i3
# start welcome app
#exec --no-startup-id sh /usr/share/endeavouros/scripts/welcome --startdelay=3
# num lock activated
exec --no-startup-id numlockx on
# configure multiple keyboard layouts and hotkey to switch (Alt+CAPSLOCK in this example)
#exec --no-startup-id setxkbmap -layout 'us,sk' -variant altgr-intl,qwerty -option 'grp:alt_caps_toggle'
# start conky:
#exec_always --no-startup-id conky
# start a script to setup displays
# uncomment the next line, use arandr to setup displays and save the file as monitor:
exec --no-startup-id ~/.screenlayout/monitor.sh
# set wallpaper
# exec --no-startup-id sleep 2 && nitrogen --restore
exec --no-startup-id sleep 1 && feh --bg-fill /usr/share/endeavouros/backgrounds/endeavouros-wallpaper.png
# set powersavings for display:
exec --no-startup-id xset s 480 dpms 600 600 600
# disable power saving (for example if using xscreensaver)
#exec --no-startup-id xset -dpms
# use xautolock to use autosuspend rules for mobile devices
# https://wiki.archlinux.org/title/Session_lock#xautolock
#exec --no-startup-id xautolock -time 60 -locker "systemctl suspend"
# xscreensaver
# https://www.jwz.org/xscreensaver
#exec --no-startup-id xscreensaver --no-splash
# Desktop notifications
# dunst config used ~/.config/dunst/dunstrc
# set alternative config if needed:
#exec --no-startup-id /usr/bin/dunst --config ~/.config/dunst/dunstrc
# may yneed to run dbus-launch explicitly:
#exec --no-startup-id dbus-launch /usr/bin/dunst
exec --no-startup-id /usr/bin/dunst
# alternative if you installed aside with XFCE4:
# exec --no-startup-id /usr/lib/xfce4/notifyd/xfce4-notifyd &
# autotiling script
# https://github.com/nwg-piotr/autotiling
# `yay -S autotiling ;) (it is in AUR)
#exec_always --no-startup-id autotiling
# Autostart apps as you like
#exec --no-startup-id sleep 2 && xfce4-terminal
exec --no-startup-id sleep 7 && firefox https://github.com/endeavouros-team/endeavouros-i3wm-setup/blob/main/force-knowledge.md
#exec --no-startup-id sleep 3 && thunar
###############
# system tray #
###############
# if you do not use dex: exec --no-startup-id dex --autostart --environment i3
# you need to have tray apps started manually one by one:
# start blueberry app for managing bluetooth devices from tray:
#exec --no-startup-id blueberry-tray
# networkmanager-applet
#exec --no-startup-id nm-applet
# clipman-applet
#exec --no-startup-id xfce4-clipman
##################
# floating rules #
##################
# set floating (nontiling) for apps needing it
for_window [class="Yad" instance="yad"] floating enable
for_window [class="Galculator" instance="galculator"] floating enable
for_window [class="Blueberry.py" instance="blueberry.py"] floating enable
# set floating (nontiling) for special apps
for_window [class="Xsane" instance="xsane"] floating enable
for_window [class="Pavucontrol" instance="pavucontrol"] floating enable
for_window [class="qt5ct" instance="qt5ct"] floating enable
for_window [class="Blueberry.py" instance="blueberry.py"] floating enable
for_window [class="Bluetooth-sendto" instance="bluetooth-sendto"] floating enable
for_window [class="Pamac-manager"] floating enable
for_window [window_role="About"] floating enable
# set border of floating window
for_window [class="urxvt"] border pixel 1
# set size of floating window
#for_window [window_role="(?i)GtkFileChooserDialog"] resize set 640 480 #to set size of file choose dialog
#for_window [class=".*"] resize set 640 480 #to change size of all floating windows
# set position of floating window
#for_window [class=".*"] move position center
######################################
# color settings for bar and windows #
######################################
# Define colors variables:
set $darkbluetrans #08052be6
set $darkblue #08052b
set $lightblue #5294e2
set $urgentred #e53935
set $white #ffffff
set $black #000000
set $purple #e345ff
set $darkgrey #383c4a
set $grey #b0b5bd
set $mediumgrey #8b8b8b
set $yellowbrown #e1b700
# define colors for windows:
#class border bground text indicator child_border
client.focused $lightblue $darkblue $white $mediumgrey $mediumgrey
client.unfocused $darkblue $darkblue $grey $darkgrey $darkgrey
client.focused_inactive $darkblue $darkblue $grey $black $black
client.urgent $urgentred $urgentred $white $yellowbrown $yellowbrown
############################################
# bar settings (input comes from i3blocks) #
############################################
# Start i3bar to display a workspace bar
# (plus the system information i3status finds out, if available)
bar {
font pango: Noto Sans Regular 10
status_command i3blocks -c ~/.config/i3/i3blocks.conf
position bottom
# i3bar_command i3bar --transparency
# it could be that you have no primary display set: set one (xrandr --output <output> --primary)
# reference: https://i3wm.org/docs/userguide.html#_tray_output
#tray_output primary
tray_padding 0
# When strip_workspace_numbers is set to yes,
# any workspace that has a name of the form
# “[n][:][NAME]” will display only the name.
strip_workspace_numbers yes
##strip_workspace_name no
colors {
separator $purple
background $darkgrey
statusline $white
# border bg txt indicator
focused_workspace $mediumgrey $grey $darkgrey $purple
active_workspace $lightblue $mediumgrey $darkgrey $purple
inactive_workspace $darkgrey $darkgrey $grey $purple
urgent_workspace $urgentred $urgentred $white $purple
}
}
# you can add different bars for multidisplay setups on each display:
# set output HDMI-0 to the display you want the bar, --transparency can be set.
# Transparency needs rgba color codes to be used where the last two letters are the transparency factor see here:
# https://gist.github.com/lopspower/03fb1cc0ac9f32ef38f4
# #08052be6 --> e6=90%
# bar {
# font pango: Noto Sans Regular 10
# status_command i3blocks -c ~/.config/i3/i3blocks-2.conf
# i3bar_command i3bar --transparency
# output HDMI-0
# position bottom
#
# When strip_workspace_numbers is set to yes,
# any workspace that has a name of the form
# “[n][:][NAME]” will display only the name.
#strip_workspace_numbers yes
##strip_workspace_name no
#
# colors {
# separator $purple
# background $darkbluetrans
# statusline $white
# border bg txt indicator
# focused_workspace $lighterblue $lighterblue $darkblue $purple
# active_workspace $lightdblue $lightdblue $darkblue $purple
# inactive_workspace $darkblue $darkblue $lightdblue $purple
# urgent_workspace $urgentred $urgentred $white $purple
# }
#}
#####################################
# Application menu handled by rofi: #
#####################################
## rofi bindings fancy application menu ($mod+d /F9 optional disabled)
bindsym $mod+d exec rofi -modi drun -show drun \
-config ~/.config/rofi/rofidmenu.rasi
#bindsym F9 exec rofi -modi drun -show drun \
# -config ~/.config/rofi/rofidmenu.rasi
## rofi bindings for window menu ($mod+t /F10 optional disabled)
bindsym $mod+t exec rofi -show window \
-config ~/.config/rofi/rofidmenu.rasi
bindsym F10 exec rofi -show window \
-config ~/.config/rofi/rofidmenu.rasi
## rofi bindings to manage clipboard (install rofi-greenclip from the AUR)
#exec --no-startup-id greenclip daemon>/dev/null
#bindsym $mod+c exec --no-startup-id rofi -modi "clipboard:greenclip print" -show clipboard \

179
.config/i3/i3blocks.conf Normal file
View File

@ -0,0 +1,179 @@
# i3blocks config file changed for EndeavourOS-i3 setup
# source is available here:
# https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/i3blocks.conf
# Maintainer: joekamprad [joekamprad //a_t// endeavouros.com]
# Former Visual Designer: Florent Valetti [@FLVAL EndeavourOS]
# created for i3wm setup on EndeavourOS
# https://endeavouros.com
# cheatsheet for icon fonts used on the block-bar:
# https://fontawesome.com/v4.7/cheatsheet/
# --> to update this run the following command:
# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/i3blocks.conf -P ~/.config/i3/
# Please see man i3blocks for a complete reference!
# The man page is also hosted at http://vivien.github.io/i3blocks
# List of valid properties:
#
# align
# color
# command
# full_text
# instance
# interval
# label
# min_width
# name
# separator
# separator_block_width
# short_text
# signal
# urgent
# Global properties
#
# The top properties below are applied to every block, but can be overridden.
separator=false
markup=pango
#[Weather]
#command=~/.config/i3/scripts/openweather
# or:
#command=~/.config/i3/scripts/openweather-city
#interval=1800
#color=#7275b3
[terminal]
full_text= 
color=#807dfe
command=i3-msg -q exec xfce4-terminal
[browser]
full_text= 
color=#ff7f81
command=i3-msg -q exec firefox
[files]
full_text= 
color=#7f3fbf
command=i3-msg -q exec thunar ~/
#[mail]
#full_text= 
#color=#dbcb75
#command=i3-msg -q exec thunderbird
[simple-2]
full_text=: :
color=#717171
# Disk usage
#
# The directory defaults to $HOME if the instance is not specified.
# The script may be called with a optional argument to set the alert
# (defaults to 10 for 10%).
[disk]
label=
instance=/
command=~/.config/i3/scripts/disk
interval=30
# Memory usage
#
# The type defaults to "mem" if the instance is not specified.
[memory]
label=
command=~/.config/i3/scripts/memory
interval=2
[cpu_usage]
label=
command=~/.config/i3/scripts/cpu_usage
#min_width=CPU: 100.00%
interval=2
[CPU-temperature]
label=
command=~/.config/i3/scripts/temperature
interval=30
#T_WARN=70
#T_CRIT=90
#SENSOR_CHIP=""
# where SENSOR_CHIP can be find with sensors output
# can be used also for GPU temperature or other temperature sensors lm-sensors detects.
# showing name of connected network (enable for wifi use)
#[net]
#label=
#command=echo "$(LANG=C nmcli d | grep connected | awk '{print $4}')"
#interval=30
[bandwidth]
command=~/.config/i3/scripts/bandwidth2
interval=persist
# Battery indicator
[battery]
command=~/.config/i3/scripts/battery2
# for alternative battery script change to battery1
# change this to battery-pinebook-pro if you are running on pinebook-pro
label=
interval=30
[simple-2]
full_text=: :
color=#717171
[pavucontrol]
full_text=
command=pavucontrol
[volume-pulseaudio]
command=~/.config/i3/scripts/volume
instance=Master
interval=1
# display keyboard layout name
# for keyboard layouts switcher
# see i3 config file
# this needs xkblayout-state installed from the AUR:
# https://aur.archlinux.org/packages/xkblayout-state-git
#[keyboard-layout]
#command=~/.config/i3/scripts/keyboard-layout
#interval=2
[keybindings]
full_text=
command=~/.config/i3/scripts/keyhint
# power-profiles-daemon implementation:
# needs package power-profiles-daemon installed and the service running see here:
# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
#set power-profile
[ppd_menu]
full_text=
command=~/.config/i3/scripts/power-profiles
color=#407437
#Show the current power-profile
[ppd-status]
command=~/.config/i3/scripts/ppd-status
interval=5
[time]
#label=
command=date '+%a %d %b %H:%M:%S'
interval=1
[shutdown_menu]
full_text=
command=~/.config/i3/scripts/powermenu
[simple-2]
full_text=: :
color=#717171

106
.config/i3/keybindings Normal file
View File

@ -0,0 +1,106 @@
EndeavourOS i3wm Keybindings cheat sheet:
--> to update this run the following command:
wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/keybindings -P ~/.config/i3/
All sources and updates are available at GitHub:
https://github.com/endeavouros-team/endeavouros-i3wm-setup
For reference consult our WIKI:
https://discovery.endeavouros.com/window-tiling-managers/i3-wm/
 = windows key
# start xfce4-terminal
+Return
# kill focused window
+q
# Application menu search by typing (fancy Rofi menu):
+d
# Window switcher menu (fancy Rofi menu):
+t
# fancy exit-menu on bottom right:
+Shift+e
# Lock the system
# lock with a picture or blurring the screen (options in config)
+l
# reload the configuration file
+Shift+c
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+Shift+r
# keybinding in fancy rofi (automated)
F1
# full keybinding list in editor:
+F1
# change window focus
+j focus left
+k focus down
+b focus up
+o focus right
# alternatively, you can use the cursor keys:
+Left focus left
+Down focus down
+Up focus up
+Right focus right
# move a focused window
+Shift+j move left
+Shift+k move down
+Shift+b move up
+Shift+o move right
# alternatively, you can use the cursor keys:
+Shift+Left move left
+Shift+Down move down
+Shift+Up move up
+Shift+Right move right
# split in horizontal orientation
+h split h
# split in vertical orientation
+v split v
# enter fullscreen mode for the focused container
+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
+s layout stacking
+g layout tabbed
+e layout toggle split
# toggle tiling / floating
+Shift+space floating toggle
# change focus between tiling / floating windows
+space focus mode_toggle
# focus the parent container
+a focus parent
# focus the child container
#+d focus child
# resize floating window
+right mouse button
## Multimedia Keys
# Redirect sound to headphones
+p
## App shortcuts
+w starts Firefox
+n starts Thunar
 Button screenshot

104
.config/i3/scripts/bandwidth2 Executable file
View File

@ -0,0 +1,104 @@
#!/usr/bin/env bash
#
# Copyright (C) 2015 James Murphy
# Licensed under the terms of the GNU GPL v2 only.
#
# i3blocks blocklet script to monitor bandwidth usage
iface="${BLOCK_INSTANCE}"
iface="${IFACE:-$iface}"
dt="${DT:-3}"
unit="${UNIT:-MB}"
LABEL="${LABEL:-<span font='FontAwesome'> </span>}" # down arrow up arrow
printf_command="${PRINTF_COMMAND:-"printf \"${LABEL}%1.0f/%1.0f %s/s\\n\", rx, wx, unit;"}"
function default_interface {
ip route | awk '/^default via/ {print $5; exit}'
}
function check_proc_net_dev {
if [ ! -f "/proc/net/dev" ]; then
echo "/proc/net/dev not found"
exit 1
fi
}
function list_interfaces {
check_proc_net_dev
echo "Interfaces in /proc/net/dev:"
grep -o "^[^:]\\+:" /proc/net/dev | tr -d " :"
}
while getopts i:t:u:p:lh opt; do
case "$opt" in
i) iface="$OPTARG" ;;
t) dt="$OPTARG" ;;
u) unit="$OPTARG" ;;
p) printf_command="$OPTARG" ;;
l) list_interfaces && exit 0 ;;
h) printf \
"Usage: bandwidth3 [-i interface] [-t time] [-u unit] [-p printf_command] [-l] [-h]
Options:
-i\tNetwork interface to measure. Default determined using \`ip route\`.
-t\tTime interval in seconds between measurements. Default: 3
-u\tUnits to measure bytes in. Default: Mb
\tAllowed units: Kb, KB, Mb, MB, Gb, GB, Tb, TB
\tUnits may have optional it/its/yte/ytes on the end, e.g. Mbits, KByte
-p\tAwk command to be called after a measurement is made.
\tDefault: printf \"<span font='FontAwesome'> </span>%%-5.1f/%%5.1f %%s/s\\\\n\", rx, wx, unit;
\tExposed variables: rx, wx, tx, unit, iface
-l\tList available interfaces in /proc/net/dev
-h\tShow this help text
" && exit 0;;
esac
done
check_proc_net_dev
iface="${iface:-$(default_interface)}"
while [ -z "$iface" ]; do
echo No default interface
sleep "$dt"
iface=$(default_interface)
done
case "$unit" in
Kb|Kbit|Kbits) bytes_per_unit=$((1024 / 8));;
KB|KByte|KBytes) bytes_per_unit=$((1024));;
Mb|Mbit|Mbits) bytes_per_unit=$((1024 * 1024 / 8));;
MB|MByte|MBytes) bytes_per_unit=$((1024 * 1024));;
Gb|Gbit|Gbits) bytes_per_unit=$((1024 * 1024 * 1024 / 8));;
GB|GByte|GBytes) bytes_per_unit=$((1024 * 1024 * 1024));;
Tb|Tbit|Tbits) bytes_per_unit=$((1024 * 1024 * 1024 * 1024 / 8));;
TB|TByte|TBytes) bytes_per_unit=$((1024 * 1024 * 1024 * 1024));;
*) echo Bad unit "$unit" && exit 1;;
esac
scalar=$((bytes_per_unit * dt))
init_line=$(cat /proc/net/dev | grep "^[ ]*$iface:")
if [ -z "$init_line" ]; then
echo Interface not found in /proc/net/dev: "$iface"
exit 1
fi
init_received=$(awk '{print $2}' <<< $init_line)
init_sent=$(awk '{print $10}' <<< $init_line)
(while true; do cat /proc/net/dev; sleep "$dt"; done) |\
stdbuf -oL grep "^[ ]*$iface:" |\
awk -v scalar="$scalar" -v unit="$unit" -v iface="$iface" '
BEGIN{old_received='"$init_received"';old_sent='"$init_sent"'}
{
received=$2
sent=$10
rx=(received-old_received)/scalar;
wx=(sent-old_sent)/scalar;
tx=rx+wr;
old_received=received;
old_sent=sent;
if(rx >= 0 && wx >= 0){
'"$printf_command"';
fflush(stdout);
}
}
'

View File

@ -0,0 +1,18 @@
#!/usr/bin/env bash
#simple Shellscript for i3blocks on Pinebook pro
#05012020 geri123@gmx.net Gerhard S.
#battery-symbols: on Manjaro you need the awesome-terminal-fonts package installed!
PERCENT=$(cat /sys/class/power_supply/cw2015-battery/capacity)
STATUS=$(cat /sys/class/power_supply/cw2015-battery/status)
case $((
$PERCENT >= 0 && $PERCENT <= 20 ? 1 :
$PERCENT > 20 && $PERCENT <= 40 ? 2 :
$PERCENT > 40 && $PERCENT <= 60 ? 3 :
$PERCENT > 60 && $PERCENT <= 80 ? 4 : 5)) in
#
(1) echo $STATUS:"" :$PERCENT%;;
(2) echo $STATUS:"" :$PERCENT%;;
(3) echo $STATUS:"" :$PERCENT%;;
(4) echo $STATUS:"" :$PERCENT%;;
(5) echo $STATUS:"" :$PERCENT%;;
esac

114
.config/i3/scripts/battery1 Executable file
View File

@ -0,0 +1,114 @@
#!/usr/bin/perl
#
# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
# Copyright 2014 Vivien Didelot <vivien@didelot.org>
#
# Licensed under the terms of the GNU GPL v3, or any later version.
#
# This script is meant to use with i3blocks. It parses the output of the "acpi"
# command (often provided by a package of the same name) to read the status of
# the battery, and eventually its remaining time (to full charge or discharge).
#
# The color will gradually change for a percentage below 85%, and the urgency
# (exit code 33) is set if there is less that 5% remaining.
# Edited by Andreas Lindlbauer <endeavouros.mousily@aleeas.com>
use strict;
use warnings;
use utf8;
# otherwise we get in console "Wide character in print at"
binmode(STDOUT, ':utf8');
# my $acpi;
my $upower;
my $percent;
my $bat_state;
my $status;
my $ac_adapt;
my $full_text;
my $short_text;
my $label = '😅';
my $bat_number = $ENV{BLOCK_INSTANCE} || 0;
open (UPOWER, "upower -i /org/freedesktop/UPower/devices/battery_BAT$bat_number | grep 'percentage' |") or die;
$upower = <UPOWER>;
close(UPOWER);
# fail on unexpected output
if ($upower !~ /: (\d+)%/) {
die "$upower\n";
}
$percent = $1;
$full_text = "$percent%";
open (BAT_STATE, "upower -i /org/freedesktop/UPower/devices/battery_BAT$bat_number | grep 'state' |") or die;
$bat_state = <BAT_STATE>;
close(BAT_STATE);
if ($bat_state !~ /: (\w+)/) {
die "$bat_state\n";
}
$status = $1;
if ($status eq 'discharging') {
$full_text .= ' ';
} elsif ($status eq 'charging') {
$full_text .= ' ';
} elsif ($status eq 'Unknown') {
open (AC_ADAPTER, "acpi -a |") or die;
$ac_adapt = <AC_ADAPTER>;
close(AC_ADAPTER);
if ($ac_adapt =~ /: ([\w-]+)/) {
$ac_adapt = $1;
if ($ac_adapt eq 'on-line') {
$full_text .= ' CHR';
} elsif ($ac_adapt eq 'off-line') {
$full_text .= ' DIS';
}
}
}
$short_text = $full_text;
if ($percent < 20) {
$label = '';
} elsif ($percent < 45) {
$label = '';
} elsif ($percent < 70) {
$label = '';
} elsif ($percent < 95) {
$label = '';
} else {
$label = '';
}
# print text
print " ${label}";
print " $full_text\n";
print " ${label}";
print " $short_text\n";
# consider color and urgent flag only on discharge
if ($status eq 'discharging') {
if ($percent < 20) {
print "#FF0000\n";
} elsif ($percent < 40) {
print "#FFAE00\n";
} elsif ($percent < 60) {
print "#FFF600\n";
} elsif ($percent < 85) {
print "#A8FF00\n";
}
if ($percent < 5) {
exit(33);
}
}
exit(0);

106
.config/i3/scripts/battery2 Executable file
View File

@ -0,0 +1,106 @@
#!/usr/bin/env python3
#
# Copyright (C) 2016 James Murphy
# Licensed under the GPL version 2 only
#
# A battery indicator blocklet script for i3blocks
from subprocess import check_output
import os
import re
config = dict(os.environ)
status = check_output(['acpi'], universal_newlines=True)
if not status:
# stands for no battery found
color = config.get("color_10", "red")
fulltext = "<span color='{}'><span font='FontAwesome'>\uf00d \uf240</span></span>".format(color)
percentleft = 100
else:
# if there is more than one battery in one laptop, the percentage left is
# available for each battery separately, although state and remaining
# time for overall block is shown in the status of the first battery
batteries = status.split("\n")
state_batteries=[]
commasplitstatus_batteries=[]
percentleft_batteries=[]
time = ""
for battery in batteries:
if battery!='':
state_batteries.append(battery.split(": ")[1].split(", ")[0])
commasplitstatus = battery.split(", ")
if not time:
time = commasplitstatus[-1].strip()
# check if it matches a time
time = re.match(r"(\d+):(\d+)", time)
if time:
time = ":".join(time.groups())
timeleft = " ({})".format(time)
else:
timeleft = ""
p = int(commasplitstatus[1].rstrip("%\n"))
if p>0:
percentleft_batteries.append(p)
commasplitstatus_batteries.append(commasplitstatus)
state = state_batteries[0]
commasplitstatus = commasplitstatus_batteries[0]
if percentleft_batteries:
percentleft = int(sum(percentleft_batteries)/len(percentleft_batteries))
else:
percentleft = 0
# stands for charging
color = config.get("color_charging", "yellow")
FA_LIGHTNING = "<span color='{}'><span font='FontAwesome'>\uf0e7</span></span>".format(color)
# stands for plugged in
FA_PLUG = "<span font='FontAwesome'>\uf1e6</span>"
# stands for using battery
FA_BATTERY = "<span font='FontAwesome'>\uf240</span>"
# stands for unknown status of battery
FA_QUESTION = "<span font='FontAwesome'>\uf128</span>"
if state == "Discharging":
fulltext = FA_BATTERY + " "
elif state == "Full":
fulltext = FA_PLUG + " "
timeleft = ""
elif state == "Unknown":
fulltext = FA_QUESTION + " " + FA_BATTERY + " "
timeleft = ""
else:
fulltext = FA_LIGHTNING + " " + FA_PLUG + " "
def color(percent):
if percent < 10:
# exit code 33 will turn background red
return config.get("color_10", "#FFFFFF")
if percent < 20:
return config.get("color_20", "#FF3300")
if percent < 30:
return config.get("color_30", "#FF6600")
if percent < 40:
return config.get("color_40", "#FF9900")
if percent < 50:
return config.get("color_50", "#FFCC00")
if percent < 60:
return config.get("color_60", "#FFFF00")
if percent < 70:
return config.get("color_70", "#FFFF33")
if percent < 80:
return config.get("color_80", "#FFFF66")
return config.get("color_full", "#FFFFFF")
form = '<span color="{}">{}%</span>'
fulltext += form.format(color(percentleft), percentleft)
#fulltext += timeleft
print(fulltext)
print(fulltext)
if percentleft < 10:
exit(33)

11
.config/i3/scripts/blur-lock Executable file
View File

@ -0,0 +1,11 @@
#!/usr/bin/env bash
PICTURE=/tmp/i3lock.png
SCREENSHOT="scrot -z $PICTURE"
BLUR="5x4"
$SCREENSHOT
convert $PICTURE -blur $BLUR $PICTURE
i3lock -i $PICTURE
rm $PICTURE

62
.config/i3/scripts/cpu_usage Executable file
View File

@ -0,0 +1,62 @@
#!/usr/bin/perl
#
# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
# Copyright 2014 Vivien Didelot <vivien@didelot.org>
# Copyright 2014 Andreas Guldstrand <andreas.guldstrand@gmail.com>
#
# Licensed under the terms of the GNU GPL v3, or any later version.
use strict;
use warnings;
use utf8;
use Getopt::Long;
# default values
my $t_warn = $ENV{T_WARN} // 50;
my $t_crit = $ENV{T_CRIT} // 80;
my $cpu_usage = -1;
my $decimals = $ENV{DECIMALS} // 0;
my $label = $ENV{LABEL} // "";
sub help {
print "Usage: cpu_usage [-w <warning>] [-c <critical>] [-d <decimals>]\n";
print "-w <percent>: warning threshold to become yellow\n";
print "-c <percent>: critical threshold to become red\n";
print "-d <decimals>: Use <decimals> decimals for percentage (default is $decimals) \n";
exit 0;
}
GetOptions("help|h" => \&help,
"w=i" => \$t_warn,
"c=i" => \$t_crit,
"d=i" => \$decimals,
);
# Get CPU usage
$ENV{LC_ALL}="en_US"; # if mpstat is not run under en_US locale, things may break, so make sure it is
open (MPSTAT, 'mpstat 1 1 |') or die;
while (<MPSTAT>) {
if (/^.*\s+(\d+\.\d+)[\s\x00]?$/) {
$cpu_usage = 100 - $1; # 100% - %idle
last;
}
}
close(MPSTAT);
$cpu_usage eq -1 and die 'Can\'t find CPU information';
# Print short_text, full_text
print "${label}";
printf "%02.${decimals}f%%\n", $cpu_usage;
print "${label}";
printf "%02.${decimals}f%%\n", $cpu_usage;
# Print color, if needed
if ($cpu_usage >= $t_crit) {
print "#FF0000\n";
exit 33;
} elsif ($cpu_usage >= $t_warn) {
print "#FFFC00\n";
}
exit 0;

48
.config/i3/scripts/disk Executable file
View File

@ -0,0 +1,48 @@
#!/usr/bin/env bash
# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
DIR="${DIR:-$BLOCK_INSTANCE}"
DIR="${DIR:-$HOME}"
ALERT_LOW="${ALERT_LOW:-$1}"
ALERT_LOW="${ALERT_LOW:-10}" # color will turn red under this value (default: 10%)
LOCAL_FLAG="-l"
if [ "$1" = "-n" ] || [ "$2" = "-n" ]; then
LOCAL_FLAG=""
fi
df -h -P $LOCAL_FLAG "$DIR" | awk -v label="$LABEL" -v alert_low=$ALERT_LOW '
/\/.*/ {
# full text
print label $4
# short text
print label $4
use=$5
# no need to continue parsing
exit 0
}
END {
gsub(/%$/,"",use)
if (100 - use < alert_low) {
# color
print "#FF0000"
}
}
'

View File

@ -0,0 +1,10 @@
#!/usr/bin/env bash
MAX_DESKTOPS=20
WORKSPACES=$(seq -s '\n' 1 1 ${MAX_DESKTOPS})
EMPTY_WORKSPACE=$( (i3-msg -t get_workspaces | tr ',' '\n' | grep num | awk -F: '{print int($2)}' ; \
echo -e ${WORKSPACES} ) | sort -n | uniq -u | head -n 1)
i3-msg workspace ${EMPTY_WORKSPACE}

View File

@ -0,0 +1,5 @@
#!/usr/bin/env bash
KBD=$(/usr/bin/xkblayout-state print '%s')
echo $KBD

25
.config/i3/scripts/keyhint Executable file
View File

@ -0,0 +1,25 @@
#!/bin/bash
Main() {
source /usr/share/endeavouros/scripts/eos-script-lib-yad || return 1
local command=(
eos_yad --title="EndeavourOS i3-wm keybindings:" --no-buttons --geometry=400x345-15-400 --list
--column=key: --column=description: --column=command:
"ESC" "close this app" ""
"=" "modkey" "(set mod Mod4)"
"+enter" "open a terminal" ""
"+Shift+n" "new empty workspace" ""
"+w" "open Browser" ""
"+n" "open Filebrowser" ""
"+d" "app menu" ""
"+q" "close focused app" ""
"Print-key" "screenshot" ""
"+Shift+e" "logout menu" ""
"F1" "open keybinding helper" ""
)
"${command[@]}"
}
Main "$@"

6
.config/i3/scripts/keyhint-2 Executable file
View File

@ -0,0 +1,6 @@
I3_CONFIG=$HOME/.config/i3/config
mod_key=$(sed -nre 's/^set \$mod (.*)/\1/p' ${I3_CONFIG})
grep "^bindsym" ${I3_CONFIG} \
| sed "s/-\(-\w\+\)\+//g;s/\$mod/${mod_key}/g;s/Mod1/Alt/g;s/exec //;s/bindsym //;s/^\s\+//;s/^\([^ ]\+\) \(.\+\)$/\2: \1/;s/^\s\+//" \
| tr -s ' ' \
| rofi -dmenu -theme ~/.config/rofi/rofikeyhint.rasi

69
.config/i3/scripts/memory Executable file
View File

@ -0,0 +1,69 @@
#!/usr/bin/env bash
# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
TYPE="${BLOCK_INSTANCE:-mem}"
awk -v type=$TYPE '
/^MemTotal:/ {
mem_total=$2
}
/^MemFree:/ {
mem_free=$2
}
/^Buffers:/ {
mem_free+=$2
}
/^Cached:/ {
mem_free+=$2
}
/^SwapTotal:/ {
swap_total=$2
}
/^SwapFree:/ {
swap_free=$2
}
END {
if (type == "swap") {
free=swap_free/1024/1024
used=(swap_total-swap_free)/1024/1024
total=swap_total/1024/1024
} else {
free=mem_free/1024/1024
used=(mem_total-mem_free)/1024/1024
total=mem_total/1024/1024
}
pct=0
if (total > 0) {
pct=used/total*100
}
# full text
# printf("%.1fG/%.1fG (%.f%%)\n", used, total, pct)
# short text
printf("%.f%%\n", pct)
# color
if (pct > 90) {
print("#FF0000")
} else if (pct > 80) {
print("#FFAE00")
} else if (pct > 70) {
print("#FFF600")
}
}
' /proc/meminfo

93
.config/i3/scripts/openweather Executable file
View File

@ -0,0 +1,93 @@
#!/usr/bin/env bash
# Edited by Andreas Lindlbauer <endeavouros.mousily@aleeas.com>
temps=("#0600FF" "#0500FF" "#0400FF" "#0300FF" "#0200FF" "#0100FF" "#0000FF" "#0002FF" "#0012FF" "#0022FF" "#0032FF" "#0044FF" "#0054FF" "#0064FF" "#0074FF" "#0084FF" "#0094FF" "#00A4FF" "#00B4FF" "#00C4FF" "#00D4FF" "#00E4FF" "#00FFF4" "#00FFD0" "#00FFA8" "#00FF83" "#00FF5C" "#00FF36" "#00FF10" "#17FF00" "#3EFF00" "#65FF00" "#B0FF00" "#FDFF00" "#FFF000" "#FFDC00" "#FFC800" "#FFB400" "#FFA000" "#FF8C00" "#FF7800" "#FF6400" "#FF5000" "#FF3C00" "#FF2800" "#FF1400" "#FF0000")
command -v jq >/dev/null 2>&1 || { echo >&2 "Program 'jq' required but it is not installed.
Aborting."; exit 1; }
command -v wget >/dev/null 2>&1 || { echo >&2 "Program 'wget' required but is not installed.
Aborting."; exit 1; }
# To use this script you need to create an API key here https://home.openweathermap.org
# You need to put your Open Weather APIKEY here:
APIKEY="keykeykey"
# And get your Latitute and Longitudes to put in here:
LAT="XX.XXXX"
LON="XX.XXXX"
URL="http://api.openweathermap.org/data/2.5/onecall?lat=${LAT}&lon=${LON}&units=metric&exclude=minutely,hourly,daily&APPID=${APIKEY}"
WEATHER_RESPONSE=$(wget -qO- "${URL}")
WEATHER_CONDITION=$(echo "$WEATHER_RESPONSE" | jq '.current.weather[0].main' | sed 's/"//g')
WEATHER_TEMP=$(echo "$WEATHER_RESPONSE" | jq '.current.feels_like')
WEATHER_INT=${WEATHER_TEMP%.*}
TIME_NOW=$( echo "$WEATHER_RESPONSE" | jq '.current.dt')
SUNRISE=$( echo "$WEATHER_RESPONSE" | jq '.current.sunrise')
SUNSET=$( echo "$WEATHER_RESPONSE" | jq '.current.sunset')
DESCRIPTION=$( echo "$WEATHER_RESPONSE" | jq '.current.weather[0].description' | sed 's/"//g')
WEATHER_ALERT=$( echo "$WEATHER_RESPONSE" | jq '.alerts[0].event' | sed 's/"//g')
DAYTIME="n"
if [[ "$TIME_NOW" > "$SUNRISE" ]] && [[ "$TIME_NOW" < "$SUNSET" ]]; then
DAYTIME="d"
fi
case $WEATHER_CONDITION in
'Clouds')
if [ "$DAYTIME" == "d" ]; then
WEATHER_ICON=""
else
WEATHER_ICON=""
fi
;;
'Rain')
WEATHER_ICON=""
;;
'Drizzle')
if [ "$DAYTIME" == "d" ]; then
WEATHER_ICON=""
else
WEATHER_ICON=""
fi
;;
'Thunderstorm')
WEATHER_ICON=""
;;
'Snow')
WEATHER_ICON=""
;;
'Clear')
if [ "$DAYTIME" == "d" ]; then
WEATHER_ICON=""
else
WEATHER_ICON=""
fi
;;
*)
WEATHER_ICON="🌫"
;;
esac
WEATHER_COLOR="#FFFFFF"
if [ "$WEATHER_INT" -lt "-11" ]; then
WEATHER_COLOR="#0000FF"
elif [ "$WEATHER_INT" -gt 35 ]; then
WEATHER_COLOR="#FF0000"
else
WEATHER_INT=$(( WEATHER_INT + 11 ))
WEATHER_COLOR="${temps[$WEATHER_INT]}"
fi
full_text="${WEATHER_ICON} ${WEATHER_TEMP}°C: ${DESCRIPTION} "
if [ "$WEATHER_ALERT" != "null" ]; then
WARN_START=$(echo "$WEATHER_RESPONSE" | jq '.alerts[0].start')
WARN_END=$(echo "$WEATHER_RESPONSE" | jq '.alerts[0].end')
WARN_START=$(date -d @"$WARN_START" +%a_%k:%M)
WARN_END=$(date -d @"$WARN_END" +%a_%k:%M)
full_text="${WEATHER_ICON} ${WEATHER_TEMP}°C: ${DESCRIPTION}  ${WEATHER_ALERT} from ${WARN_START} to ${WARN_END}  "
fi
echo "${full_text}"
echo "${WEATHER_TEMP}°C "
echo "${WEATHER_COLOR}"

View File

@ -0,0 +1,43 @@
#!/usr/bin/env bash
command -v jq >/dev/null 2>&1 || { echo >&2 "Program 'jq' required but it is not installed.
Aborting."; exit 1; }
command -v wget >/dev/null 2>&1 || { echo >&2 "Program 'wget' required but is not installed.
Aborting."; exit 1; }
# To use this script you need to create an API key here https://home.openweathermap.org
# You need to put your Open Weather APIKEY here:
APIKEY="keykey"
# find your City ID here: https://openweathermap.org/
# search for your city and copy the ID from the URL inside the browser.
CITY_ID="idid"
URL="http://api.openweathermap.org/data/2.5/weather?id=${CITY_ID}&units=metric&APPID=${APIKEY}"
WEATHER_RESPONSE=$(wget -qO- "${URL}")
WEATHER_CONDITION=$(echo $WEATHER_RESPONSE | jq '.weather[0].main' | sed 's/"//g')
WEATHER_TEMP=$(echo $WEATHER_RESPONSE | jq '.main.temp')
WIND_DIR=$( echo "$WEATHER_RESPONSE" | jq '.wind.deg')
WIND_SPEED=$( echo "$WEATHER_RESPONSE" | jq '.wind.speed')
WIND_SPEED=$(awk "BEGIN {print 60*60*$WIND_SPEED/1000}")
WIND_DIR=$(awk "BEGIN {print int(($WIND_DIR % 360)/22.5)}")
DIR_ARRAY=( N NNE NE ENE E ESE SE SSE S SSW SW WSW W WNW NW NNW N )
WIND_DIR=${DIR_ARRAY[WIND_DIR]}
case $WEATHER_CONDITION in
'Clouds')
WEATHER_ICON=""
;;
'Rain')
WEATHER_ICON=""
;;
'Snow')
WEATHER_ICON=""
;;
*)
WEATHER_ICON=""
;;
esac
echo "${WEATHER_ICON} ${WEATHER_TEMP}°C: ${WIND_SPEED} km/h ${WIND_DIR}"

View File

@ -0,0 +1,5 @@
# Weather
[Weather]
command=~/.config/i3/scripts/openweather
interval=1800
color=#7275b3

190
.config/i3/scripts/power-profiles Executable file
View File

@ -0,0 +1,190 @@
#!/usr/bin/env bash
#
# Use rofi/zenity to change system runstate thanks to systemd.
#
# Note: this currently relies on associative array support in the shell.
#
# Inspired from i3pystatus wiki:
# https://github.com/enkore/i3pystatus/wiki/Shutdown-Menu
#
# Copyright 2015 Benjamin Chrétien <chretien at lirmm dot fr>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# power-profiles-daemon implementation:
# needs package power-profiles-daemon installed and the service running see here:
# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
# used in i3-blocks: ~/.config/i3/i3blocks.conf together with: ~/.config/i3/scripts/ppd-status
#######################################################################
# BEGIN CONFIG #
#######################################################################
# Use a custom lock script
#LOCKSCRIPT="i3lock-extra -m pixelize"
# Colors: FG (foreground), BG (background), HL (highlighted)
FG_COLOR="#bbbbbb"
BG_COLOR="#111111"
HLFG_COLOR="#111111"
HLBG_COLOR="#bbbbbb"
BORDER_COLOR="#222222"
# Options not related to colors
#ROFI_TEXT=":"
#ROFI_OPTIONS=(-width -11 -location 0 -hide-scrollbar -bw 30 -color-window "#dd310027,#dd0310027,#dd310027" -padding 5)
#ROFI_OPTIONS=(-width -18 -location 4 -hide-scrollbar -color-window "#cc310027,#00a0009a,#cc310027" -padding 5 -font "Sourcecode Pro Regular 10, FontAwesome 9")
ROFI_OPTIONS=(-theme ~/.config/rofi/power-profiles.rasi)
# Zenity options
ZENITY_TITLE="Power Profiles"
ZENITY_TEXT="Set Profiles:"
ZENITY_OPTIONS=(--column= --hide-header)
#######################################################################
# END CONFIG #
#######################################################################
# Whether to ask for user's confirmation
enable_confirmation=false
# Preferred launcher if both are available
preferred_launcher="rofi"
usage="$(basename "$0") [-h] [-c] [-p name] -- display a menu for shutdown, reboot, lock etc.
where:
-h show this help text
-c ask for user confirmation
-p preferred launcher (rofi or zenity)
This script depends on:
- systemd,
- i3,
- rofi or zenity."
# Check whether the user-defined launcher is valid
launcher_list=(rofi zenity)
function check_launcher() {
if [[ ! "${launcher_list[@]}" =~ (^|[[:space:]])"$1"($|[[:space:]]) ]]; then
echo "Supported launchers: ${launcher_list[*]}"
exit 1
else
# Get array with unique elements and preferred launcher first
# Note: uniq expects a sorted list, so we cannot use it
i=1
launcher_list=($(for l in "$1" "${launcher_list[@]}"; do printf "%i %s\n" "$i" "$l"; let i+=1; done \
| sort -uk2 | sort -nk1 | cut -d' ' -f2- | tr '\n' ' '))
fi
}
# Parse CLI arguments
while getopts "hcp:" option; do
case "${option}" in
h) echo "${usage}"
exit 0
;;
c) enable_confirmation=true
;;
p) preferred_launcher="${OPTARG}"
check_launcher "${preferred_launcher}"
;;
*) exit 1
;;
esac
done
# Check whether a command exists
function command_exists() {
command -v "$1" &> /dev/null 2>&1
}
# systemctl required
if ! command_exists systemctl ; then
exit 1
fi
# menu defined as an associative array
typeset -A menu
# Menu with keys/commands
menu=(
[ Performance]="powerprofilesctl set performance"
[ Balanced]="powerprofilesctl set balanced"
[ Power Saver]="powerprofilesctl set power-saver"
[ Cancel]=""
)
menu_nrows=${#menu[@]}
# Menu entries that may trigger a confirmation message
menu_confirm="Shutdown Reboot Hibernate Suspend Halt Logout"
launcher_exe=""
launcher_options=""
rofi_colors=""
function prepare_launcher() {
if [[ "$1" == "rofi" ]]; then
rofi_colors=(-bc "${BORDER_COLOR}" -bg "${BG_COLOR}" -fg "${FG_COLOR}" \
-hlfg "${HLFG_COLOR}" -hlbg "${HLBG_COLOR}")
launcher_exe="rofi"
launcher_options=(-dmenu -i -lines "${menu_nrows}" -p "${ROFI_TEXT}" \
"${rofi_colors}" "${ROFI_OPTIONS[@]}")
elif [[ "$1" == "zenity" ]]; then
launcher_exe="zenity"
launcher_options=(--list --title="${ZENITY_TITLE}" --text="${ZENITY_TEXT}" \
"${ZENITY_OPTIONS[@]}")
fi
}
for l in "${launcher_list[@]}"; do
if command_exists "${l}" ; then
prepare_launcher "${l}"
break
fi
done
# No launcher available
if [[ -z "${launcher_exe}" ]]; then
exit 1
fi
launcher=(${launcher_exe} "${launcher_options[@]}")
selection="$(printf '%s\n' "${!menu[@]}" | sort | "${launcher[@]}")"
function ask_confirmation() {
if [ "${launcher_exe}" == "rofi" ]; then
confirmed=$(echo -e "Yes\nNo" | rofi -dmenu -i -lines 2 -p "${selection}?" \
"${rofi_colors}" "${ROFI_OPTIONS[@]}")
[ "${confirmed}" == "Yes" ] && confirmed=0
elif [ "${launcher_exe}" == "zenity" ]; then
zenity --question --text "Are you sure you want to ${selection,,}?"
confirmed=$?
fi
if [ "${confirmed}" == 0 ]; then
i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
fi
}
if [[ $? -eq 0 && ! -z ${selection} ]]; then
if [[ "${enable_confirmation}" = true && \
${menu_confirm} =~ (^|[[:space:]])"${selection}"($|[[:space:]]) ]]; then
ask_confirmation
else
i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
fi
fi

186
.config/i3/scripts/powermenu Executable file
View File

@ -0,0 +1,186 @@
#!/usr/bin/env bash
#
# Use rofi/zenity to change system runstate thanks to systemd.
#
# Note: this currently relies on associative array support in the shell.
#
# Inspired from i3pystatus wiki:
# https://github.com/enkore/i3pystatus/wiki/Shutdown-Menu
#
# Copyright 2015 Benjamin Chrétien <chretien at lirmm dot fr>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# modified to work with latest rofi update by joekamprad <joekamprad@endeavouros.com>
#######################################################################
# BEGIN CONFIG #
#######################################################################
# Use a custom lock script
#LOCKSCRIPT="i3lock-extra -m pixelize"
# Colors: FG (foreground), BG (background), HL (highlighted)
FG_COLOR="#bbbbbb"
BG_COLOR="#111111"
HLFG_COLOR="#111111"
HLBG_COLOR="#bbbbbb"
BORDER_COLOR="#222222"
# Options not related to colors (most rofi options do not work anymore)
ROFI_OPTIONS=(-theme ~/.config/rofi/powermenu.rasi)
# Zenity options
ZENITY_TITLE="Power Menu"
ZENITY_TEXT="Action:"
ZENITY_OPTIONS=(--column= --hide-header)
#######################################################################
# END CONFIG #
#######################################################################
# Whether to ask for user's confirmation
enable_confirmation=false
# Preferred launcher if both are available
preferred_launcher="rofi"
usage="$(basename "$0") [-h] [-c] [-p name] -- display a menu for shutdown, reboot, lock etc.
where:
-h show this help text
-c ask for user confirmation
-p preferred launcher (rofi or zenity)
This script depends on:
- systemd,
- i3,
- rofi or zenity."
# Check whether the user-defined launcher is valid
launcher_list=(rofi zenity)
function check_launcher() {
if [[ ! "${launcher_list[@]}" =~ (^|[[:space:]])"$1"($|[[:space:]]) ]]; then
echo "Supported launchers: ${launcher_list[*]}"
exit 1
else
# Get array with unique elements and preferred launcher first
# Note: uniq expects a sorted list, so we cannot use it
i=1
launcher_list=($(for l in "$1" "${launcher_list[@]}"; do printf "%i %s\n" "$i" "$l"; let i+=1; done \
| sort -uk2 | sort -nk1 | cut -d' ' -f2- | tr '\n' ' '))
fi
}
# Parse CLI arguments
while getopts "hcp:" option; do
case "${option}" in
h) echo "${usage}"
exit 0
;;
c) enable_confirmation=true
;;
p) preferred_launcher="${OPTARG}"
check_launcher "${preferred_launcher}"
;;
*) exit 1
;;
esac
done
# Check whether a command exists
function command_exists() {
command -v "$1" &> /dev/null 2>&1
}
# systemctl required
if ! command_exists systemctl ; then
exit 1
fi
# menu defined as an associative array
typeset -A menu
# Menu with keys/commands
menu=(
[ Shutdown]="systemctl poweroff"
[ Reboot]="systemctl reboot"
[ Suspend]="systemctl suspend"
[ Hibernate]="systemctl hibernate"
[ Lock]="~/.config/i3/scripts/blur-lock"
[ Logout]="i3-msg exit"
[ Cancel]=""
)
menu_nrows=${#menu[@]}
# Menu entries that may trigger a confirmation message
menu_confirm="Shutdown Reboot Hibernate Suspend Halt Logout"
launcher_exe=""
launcher_options=""
rofi_colors=""
function prepare_launcher() {
if [[ "$1" == "rofi" ]]; then
rofi_colors=(-bc "${BORDER_COLOR}" -bg "${BG_COLOR}" -fg "${FG_COLOR}" \
-hlfg "${HLFG_COLOR}" -hlbg "${HLBG_COLOR}")
launcher_exe="rofi"
launcher_options=(-dmenu -i -lines "${menu_nrows}" -p "${ROFI_TEXT}" \
"${rofi_colors}" "${ROFI_OPTIONS[@]}")
elif [[ "$1" == "zenity" ]]; then
launcher_exe="zenity"
launcher_options=(--list --title="${ZENITY_TITLE}" --text="${ZENITY_TEXT}" \
"${ZENITY_OPTIONS[@]}")
fi
}
for l in "${launcher_list[@]}"; do
if command_exists "${l}" ; then
prepare_launcher "${l}"
break
fi
done
# No launcher available
if [[ -z "${launcher_exe}" ]]; then
exit 1
fi
launcher=(${launcher_exe} "${launcher_options[@]}")
selection="$(printf '%s\n' "${!menu[@]}" | sort | "${launcher[@]}")"
function ask_confirmation() {
if [ "${launcher_exe}" == "rofi" ]; then
confirmed=$(echo -e "Yes\nNo" | rofi -dmenu -i -lines 2 -p "${selection}?" \
"${rofi_colors}" "${ROFI_OPTIONS[@]}")
[ "${confirmed}" == "Yes" ] && confirmed=0
elif [ "${launcher_exe}" == "zenity" ]; then
zenity --question --text "Are you sure you want to ${selection,,}?"
confirmed=$?
fi
if [ "${confirmed}" == 0 ]; then
i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
fi
}
if [[ $? -eq 0 && ! -z ${selection} ]]; then
if [[ "${enable_confirmation}" = true && \
${menu_confirm} =~ (^|[[:space:]])"${selection}"($|[[:space:]]) ]]; then
ask_confirmation
else
i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
fi
fi

11
.config/i3/scripts/ppd-status Executable file
View File

@ -0,0 +1,11 @@
#!/usr/bin/env bash
#
# power-profiles-daemon implementation:
# needs package power-profiles-daemon installed and the service running see here:
# https://wiki.archlinux.org/title/CPU_frequency_scaling#power-profiles-daemon
# used in i3-blocks: ~/.config/i3/i3blocks.conf together with: ~/.config/i3/scripts/power-profiles
# script to show current power profile
current_profile=$(/usr/bin/powerprofilesctl get)
echo "$current_profile"

86
.config/i3/scripts/temperature Executable file
View File

@ -0,0 +1,86 @@
#!/usr/bin/env perl
# Copyright 2014 Pierre Mavro <deimos@deimos.fr>
# Copyright 2014 Vivien Didelot <vivien@didelot.org>
# Copyright 2014 Andreas Guldstrand <andreas.guldstrand@gmail.com>
# Copyright 2014 Benjamin Chretien <chretien at lirmm dot fr>
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# Edited by Andreas Lindlbauer <endeavouros.mousily@aleeas.com>
use strict;
use warnings;
use utf8;
use Getopt::Long;
binmode(STDOUT, ":utf8");
# default values
my $t_warn = $ENV{T_WARN} || 70;
my $t_crit = $ENV{T_CRIT} || 90;
my $chip = $ENV{SENSOR_CHIP} || "";
my $temperature = -9999;
my $label = "😀 ";
sub help {
print "Usage: temperature [-w <warning>] [-c <critical>] [--chip <chip>]\n";
print "-w <percent>: warning threshold to become yellow\n";
print "-c <percent>: critical threshold to become red\n";
print "--chip <chip>: sensor chip\n";
exit 0;
}
GetOptions("help|h" => \&help,
"w=i" => \$t_warn,
"c=i" => \$t_crit,
"chip=s" => \$chip);
# Get chip temperature
open (SENSORS, "sensors -u $chip |") or die;
while (<SENSORS>) {
if (/^\s+temp1_input:\s+[\+]*([\-]*\d+\.\d)/) {
$temperature = $1;
last;
}
}
close(SENSORS);
$temperature eq -9999 and die 'Cannot find temperature';
if ($temperature < 45) {
$label = '';
} elsif ($temperature < 55) {
$label = '';
} elsif ($temperature < 65) {
$label = '';
} elsif ($temperature < 75) {
$label = '';
} else {
$label = '';
}
# Print short_text, full_text
print "${label}";
print " $temperature°C\n";
print "${label}";
print " $temperature°C\n";
# Print color, if needed
if ($temperature >= $t_crit) {
print "#FF0000\n";
exit 33;
} elsif ($temperature >= $t_warn) {
print "#FFFC00\n";
}
exit 0;

93
.config/i3/scripts/volume Executable file
View File

@ -0,0 +1,93 @@
#!/usr/bin/env bash
# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
# Copyright (C) 2014 Alexander Keller <github@nycroth.com>
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# original source: https://github.com/vivien/i3blocks-contrib/tree/master/volume
# check the readme: https://github.com/vivien/i3blocks-contrib/blob/master/volume/README.md
#------------------------------------------------------------------------
# The second parameter overrides the mixer selection
# For PulseAudio users, eventually use "pulse"
# For Jack/Jack2 users, use "jackplug"
# For ALSA users, you may use "default" for your primary card
# or you may use hw:# where # is the number of the card desired
if [[ -z "$MIXER" ]] ; then
MIXER="default"
if command -v pulseaudio >/dev/null 2>&1 && pulseaudio --check ; then
# pulseaudio is running, but not all installations use "pulse"
if amixer -D pulse info >/dev/null 2>&1 ; then
MIXER="pulse"
fi
fi
[ -n "$(lsmod | grep jack)" ] && MIXER="jackplug"
MIXER="${2:-$MIXER}"
fi
# The instance option sets the control to report and configure
# This defaults to the first control of your selected mixer
# For a list of the available, use `amixer -D $Your_Mixer scontrols`
if [[ -z "$SCONTROL" ]] ; then
SCONTROL="${BLOCK_INSTANCE:-$(amixer -D $MIXER scontrols |
sed -n "s/Simple mixer control '\([^']*\)',0/\1/p" |
head -n1
)}"
fi
# The first parameter sets the step to change the volume by (and units to display)
# This may be in in % or dB (eg. 5% or 3dB)
if [[ -z "$STEP" ]] ; then
STEP="${1:-5%}"
fi
# AMIXER(1):
# "Use the mapped volume for evaluating the percentage representation like alsamixer, to be
# more natural for human ear."
NATURAL_MAPPING=${NATURAL_MAPPING:-0}
if [[ "$NATURAL_MAPPING" != "0" ]] ; then
AMIXER_PARAMS="-M"
fi
#------------------------------------------------------------------------
capability() { # Return "Capture" if the device is a capture device
amixer $AMIXER_PARAMS -D $MIXER get $SCONTROL |
sed -n "s/ Capabilities:.*cvolume.*/Capture/p"
}
volume() {
amixer $AMIXER_PARAMS -D $MIXER get $SCONTROL $(capability)
}
format() {
perl_filter='if (/.*\[(\d+%)\] (\[(-?\d+.\d+dB)\] )?\[(on|off)\]/)'
perl_filter+='{CORE::say $4 eq "off" ? "MUTE" : "'
# If dB was selected, print that instead
perl_filter+=$([[ $STEP = *dB ]] && echo '$3' || echo '$1')
perl_filter+='"; exit}'
output=$(perl -ne "$perl_filter")
echo "$LABEL$output"
}
#------------------------------------------------------------------------
case $BLOCK_BUTTON in
3) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) toggle ;; # right click, mute/unmute
4) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) ${STEP}+ unmute ;; # scroll up, increase
5) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) ${STEP}- unmute ;; # scroll down, decrease
esac
volume | format

View File

@ -0,0 +1,96 @@
#!/bin/bash
# original source: https://gitlab.com/Nmoleo/i3-volume-brightness-indicator
# taken from here: https://gitlab.com/Nmoleo/i3-volume-brightness-indicator
# See README.md for usage instructions
bar_color="#7f7fff"
volume_step=1
brightness_step=2.5
max_volume=100
# Uses regex to get volume from pactl
function get_volume {
pactl get-sink-volume @DEFAULT_SINK@ | grep -Po '[0-9]{1,3}(?=%)' | head -1
}
# Uses regex to get mute status from pactl
function get_mute {
pactl get-sink-mute @DEFAULT_SINK@ | grep -Po '(?<=Mute: )(yes|no)'
}
# Uses regex to get brightness from xbacklight
function get_brightness {
xbacklight | grep -Po '[0-9]{1,3}' | head -n 1
}
# Returns a mute icon, a volume-low icon, or a volume-high icon, depending on the volume
function get_volume_icon {
volume=$(get_volume)
mute=$(get_mute)
if [ "$volume" -eq 0 ] || [ "$mute" == "yes" ] ; then
volume_icon=""
elif [ "$volume" -lt 50 ]; then
volume_icon=""
else
volume_icon=""
fi
}
# Always returns the same icon - I couldn't get the brightness-low icon to work with fontawesome
function get_brightness_icon {
brightness_icon=""
}
# Displays a volume notification using dunstify
function show_volume_notif {
volume=$(get_mute)
get_volume_icon
dunstify -i audio-volume-muted-blocking -t 1000 -r 2593 -u normal "$volume_icon $volume%" -h int:value:$volume -h string:hlcolor:$bar_color
}
# Displays a brightness notification using dunstify
function show_brightness_notif {
brightness=$(get_brightness)
get_brightness_icon
dunstify -t 1000 -r 2593 -u normal "$brightness_icon $brightness%" -h int:value:$brightness -h string:hlcolor:$bar_color
}
# Main function - Takes user input, "volume_up", "volume_down", "brightness_up", or "brightness_down"
case $1 in
volume_up)
# Unmutes and increases volume, then displays the notification
pactl set-sink-mute @DEFAULT_SINK@ 0
volume=$(get_volume)
if [ $(( "$volume" + "$volume_step" )) -gt $max_volume ]; then
pactl set-sink-volume @DEFAULT_SINK@ $max_volume%
else
pactl set-sink-volume @DEFAULT_SINK@ +$volume_step%
fi
show_volume_notif
;;
volume_down)
# Raises volume and displays the notification
pactl set-sink-volume @DEFAULT_SINK@ -$volume_step%
show_volume_notif
;;
volume_mute)
# Toggles mute and displays the notification
pactl set-sink-mute @DEFAULT_SINK@ toggle
show_volume_notif
;;
brightness_up)
# Increases brightness and displays the notification
xbacklight -inc $brightness_step -time 0
show_brightness_notif
;;
brightness_down)
# Decreases brightness and displays the notification
xbacklight -dec $brightness_step -time 0
show_brightness_notif
;;
esac

25
.config/i3/scripts/vpn Executable file
View File

@ -0,0 +1,25 @@
#!/usr/bin/env bash
#
# Copyright (C) 2021 Andreas Lindlbauer
# Licensed under the terms of EUPLv1.2.
#
# i3blocks blocklet script to monitor the (nord)vpn connection
vpnstatus="📢"
nordvpn_output=$(nordvpn status | cat -v | head -1 | sed -e 's/\^M-^M ^M//g' )
if [ "${nordvpn_output}" = "Status: Connected" ]; then
vpnstatus="🥸"
elif [ "${nordvpn_output}" = "A new version of NordVPN is available! Please update the application." ]; then
nordvpn_output=$(nordvpn status | cat -v | head -2 | tail -1 | sed -e 's/\^M-^M ^M//g' )
if [ "${nordvpn_output}" = "Status: Connected" ]; then
vpnstatus="🥴"
elif [ "${nordvpn_output}" = "Status: Disconnected" ]; then
vpnstatus="📢"
fi
elif [ "${nordvpn_output}" = "Status: Disconnected" ]; then
vpnstatus="📢"
elif [[ "$nordvpn_output" == *\/* ]] || [[ "$nordvpn_output" == *\\* ]]; then
vpnstatus="Something's very wrong"
fi
echo "$vpnstatus"